The MidRanger Rfid reader with antenna is a complete device for reading RFID library elements activated on 13.56 MHz. The product allows for a short range protected sensing field and can be used as an office solution or can be mounted under a table (non-metallic).
The reader and antenna are both based on the 50 Ω standard. The 50 Ω allows for standardized communications and changes in cable length between the antenna and the reader.
|
Physical properties
|
|
|---|---|
|
Dimensions (mm)
|
MidRanger: 140 x 105 x 29 – Antenna: 348 x 255 x 20
|
| Weight |
Antenna: 2.5kg Reader: 0.6kg
|
|
Material
|
Stainless Steel, Zinc Plated Steel (Powder Coated) and hips
|
|
Color
|
Black (RAL9005) & Brushed Stainless Steel
|
| Function |
Ready / Return – Reading Station
|
| Mounting |
Placed on the desk, or mounted under table / desk
|
| Cable length |
2m
|
|
RFID Specifications
|
|
|---|---|
|
The Technology:
|
RFID
|
| Frequency: |
13,56 MHz
|
|
Maximum power:
|
1 W
|
|
EAS function:
|
Yes, based on EAS bits and / or AFI
|
|
Links
|
|
|---|---|
|
Communication ports
|
USB / UTP
|
| max length communication cable |
USB: 5m / UTP: 90m
|
|
IP Address
|
Static / DHCP
|
Certificates: ISO 15693 / ISO 18000 to 3,1
The standard MidRanger consists of an RFID reader and antenna, which can be placed on top or can be mounted under a table. The drive can be connected to existing hardware (PC) and / or library management systems via a USB or LAN connection.
The MidRanger was designed with mobility in mind. Thanks to its rubber bushings and sturdy design, you can easily place it on any flat surface, without worrying about scratches. Do you want to mount the drive under a surface? Simply remove the top case and use the four mounting points to mount your drive under any desk.
Copyright Tous droits réservés © 2024
